-
steel ruler, with beveled edge, approximately 1 m. long, for a thickness of 5 mm,
is useful for marking and verifying the wood boards;
-
precision square, to track and verify the right angles, and some models allow us to draw even at 45;
-
hardwood bevel allows you to detect and report any kind of angle;
-
outside caliper, measure the external size of an object;
-
inside caliper, to measure the internal size of an object;
-
divider caliper, or compass; serves to trace circles and arcs;
-
caliper with graduated bow, indicating the opening angle;
-
extendable
meter;
-
vernier caliper, used to measure thickness gi external, internal, and through the sliding rod, the depth of the holes or collections, with remarkable accuracy and speed;
-
marking knife to draw lines that will serve as a guide for cutting;
-
marking gauge; used to draw lines parallel to an edge; consists of a swing, equipped with a locking screw, which flows along a shaft, on which are fixed a blade and a pin of steel;
-
marking gauge for mortises; equipped with two pins, one of which is movable, which can adjust the amplitude of the mortise and tenon;
-
marking gauge; used to plot controvena; the blade can be removed for sharpening;
-
carpenter's pencil.
The
portal Restauromobile
Are you a restorer, a carpenter, a craftsman of
wood or an antique dealer or a private person and would like to submit
your work or sell furniture or antiques, or sell items, equipment and
materials for carpenters and restorers?
Register on the site and enter your free ads.
The portal has also, in the antiques & surroundings section:
|
|
|
|